Antennas Direct 8-Element Bowtie UHF Outdoor HDTV Antenna, Multi-Directional, 70+ Mile Range, 4K 8K UHD NEXTGEN TV – w/All-Weather Mounting Hardware

Bringing free television signals into your home requires the right equipment, especially if broadcast towers are spread out across your region. The UHF outdoor HDTV antenna from Antennas Direct addresses this scenario by pairing a multi-directional bowtie configuration with long-range reception capabilities, making it a reliable choice for suburban or rural television viewers who want access to major networks without recurring subscription fees.

The standout feature of this model is its dual-panel architecture. Specialized brackets connect the two panels, allowing you to turn each panel independently toward different broadcast towers. Instead of compromising by aiming in one median direction or adding a motorized rotor, you can aim one array toward a cluster of towers in the east and the other panel toward towers in the north, pulling in signals from varying origins simultaneously.

Long-range capabilities allow this setup to capture signals from up to 70 miles away under appropriate reception conditions. The beam angle spans from 24.5 degrees at 470 MHz down to 16.3 degrees at 698 MHz, focusing the reception tightly across the UHF spectrum. In addition to standard high-definition broadcasts, the hardware is built to handle modern 4K, 8K UHD, and NEXTGEN TV signals, letting you enjoy high-resolution programming directly from local affiliates.

Placement flexibility is broad because the construction is suited for both exterior installations and sheltered attic spaces. When set up outdoors, the supplied all-weather mounting hardware provides the stability required to withstand exposure to exterior climate conditions. Keep in mind that the tight beam angle at higher frequencies means panel alignment needs careful attention during assembly, and because it is an 8-element array, it will need a fair amount of clearance wherever you choose to mount it.

Verdict: This UHF outdoor HDTV antenna is an excellent match for homeowners living within 70 miles of broadcast origins who need to target transmission towers situated in separate directions. Those with tight space constraints or living extremely close to a single local tower cluster might prefer a smaller single-panel alternative.

A great fit if you:

• Live in an area where local television broadcast towers are located in two distinct directions from your home.
• Reside up to 70 miles away from regional broadcast transmitters and need a long-range UHF reception solution.
• Want to capture uncompressed over-the-air programming in modern broadcast resolutions such as 4K, 8K, or NEXTGEN TV.
• Have adequate clearance to mount an 8-element multi-panel array in your attic space or on an outdoor exterior structure.

Consider something else if you:

• Need to receive VHF television frequencies that fall outside the specified UHF operating spectrum.
• Have limited living quarters, such as an apartment, that can only accommodate a compact indoor window antenna.
• Live within a few miles of a single transmission tower where a smaller directional antenna would be sufficient.

Confirm on the listing:

• Check whether a mounting mast or pole is included, or if you need to supply your own pipe for the hardware.
• Check the exact physical dimensions of the assembled panels to make sure it clears your roofline or attic rafters.
• Confirm if coaxial cabling is packaged in the box or if you must purchase the run from the antenna to your television separately.
• Check whether your television has a built-in tuner capable of receiving ATSC 3.0 NEXTGEN TV or 4K signals.

How to compare your options: When shopping for a television antenna, start by identifying the distance to your regional broadcast towers and whether they transmit in the UHF band. Compare the stated range, beam angle, and whether the hardware allows panels to be adjusted independently to suit your local transmitter map. Also examine where you plan to install it, ensuring the provided mounting brackets and weatherproofing match your attic or exterior location.

Take time to research the compass headings of your local broadcast towers before putting the assembly together. Because the brackets allow each panel to be directed independently, angle one panel directly toward your primary tower group and orient the second panel toward any secondary transmitters in your region.

If you choose an attic installation, make sure the panels have a clear line of sight through roof decking rather than being blocked by dense building materials or metal barriers. For outdoor setups, secure all included weather-resistant mounting hardware firmly to eliminate shifting caused by strong winds, which could disrupt the narrow beam angle.

Once the hardware is secured in place and linked to your television, run a full channel scan from your television menu. If any anticipated channels are missing, make minor directional adjustments to the corresponding panel and rescan until you achieve the most reliable channel lineup.

Can the two panels be aimed at different cities?
Yes, the included special brackets allow each of the two antenna panels to target broadcast towers located in separate directions independently.

What broadcast frequencies does this antenna receive?
This model is built for UHF television signals, operating with a beam angle of 24.5 degrees at 470 MHz down to 16.3 degrees at 698 MHz.

Does this unit come with mounting hardware?
Yes, it comes equipped with all-weather mounting hardware designed for outdoor or attic installation.

Does it support 4K and NEXTGEN TV?
Yes, the antenna is designed to receive 4K, 8K UHD, and NEXTGEN TV broadcast signals where available.

Where was this antenna manufactured?
The listed country of origin for this product is Taiwan.