MEEaudio
MEE audio Connect Hub Bluetooth Transmitter/Receiver with Audio Pass-Through for TV/Home Stereo
Disclosure: We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
Highlights
- 2-IN-1 BLUETOOTH ADAPTER + PASS-THROUGH: 1 - Transmitter Mode (TX + Pass-Through): stream audio wirelessly from TVs and other devices to Bluetooth headphones or speakers; Pass-Through lets you plug another device, such as a soundbar, into the Connect Hub to share an audio connection from your TV; 2 - Receiver Mode (RX): stream audio wirelessly from your phone or tablet to your soundbar, home theater receiver, or other non-Bluetooth audio device
- APTX LOW LATENCY TECHNOLOGY: Qualcomm aptX and aptX Low Latency Bluetooth audio codecs provide higher fidelity audio, minimize audio lag, and ensure perfect lip-syncing with compatible devices. NOTE: use aptX Low Latency-enabled headphones for best results
- DUAL-HEADPHONE STREAMING : Stream audio to up to two Bluetooth headphones or speakers simultaneously and adjust volume levels for each independently, allowing users to listen comfortably without bothering each other or those around them; advanced adjustable antenna provides up to 98 ft of wireless coverage for more freedom to position your speakers or move about your home
- VOLUME BOOST MODE & VOICE-ASSISTED SETUP: The Connect Hub introduces a VOLUME BOOST feature for RCA/analog audio connections, which can help make the audio output of older TVs louder. Built-in status display and speaker provide the Connect Hub with a simplified, voice-assisted setup process, which is more convenient for you to operate the settings; use with the MEE audio Matrix Cinema headphones for even more hearing assistance functionality
- ANALOG AND DIGITAL CONNECTIONS: Compatible with new and old TVs and other audio devices including soundbars, home theater receivers, computers, airplane entertainment systems, set top/cable boxes, and even gym equipment - anything with a 3.5mm headphone jack, RCA, or TOSLINK digital optical (SPDIF) audio output connections; All cables are included; NOTE: Set your TV audio output setting to PCM for Optical compatibility
Why You'll Love It
- Share TV audio with a soundbar while streaming wirelessly to your headphones
- Stream to two pairs of Bluetooth headphones at once with separate volume controls
- Reduce audio delay for proper lip-syncing when paired with aptX Low Latency headphones
- Stream phone audio to older stereo receivers or wired speakers in receiver mode
- Boost volume on analog connections to help hear dialogue on older televisions
- Connect to virtually any television using included digital optical, 3.5mm, and RCA cables
Pros
- +Dual headphone streaming with independent volume
- +Pass-through mode keeps soundbar connected
- +Up to 98 feet of wireless coverage
- +Voice-assisted setup and built-in status display
- +Includes optical, RCA, and 3.5mm audio cables
Cons
- -Requires manual PCM audio setting for optical output
- -Needs aptX Low Latency headphones to minimize lag
- -Volume boost only works on RCA and analog connections
Detailed Review
The MEE audio Connect Hub is a versatile 2-in-1 Bluetooth transmitter and receiver built to bridge the gap between modern wireless audio and traditional home entertainment gear. It allows users to broadcast television audio directly to wireless headphones or reverse the process to stream music from a phone into a legacy stereo setup. It serves households that need personal listening options without disconnecting existing sound systems.
In transmitter mode, the audio pass-through feature allows you to route television audio to both your wireless headphones and an external soundbar at the same time. The adapter supports dual-headphone streaming, letting two people listen simultaneously while adjusting their volume levels independently. An adjustable external antenna extends wireless range up to 98 feet, offering flexibility to move around the room without dropping the signal.
Setup is guided by a built-in status display, integrated speaker, and voice prompts to simplify connection troubleshooting. For older televisions with quiet analog outputs, a dedicated volume boost feature amplifies RCA and 3.5mm connections. To prevent video sync issues, the hub uses Qualcomm aptX and aptX Low Latency codecs, keeping dialogue synchronized with the screen when paired with compatible headphones.
There are a few setup requirements to keep in mind. The volume boost mode functions strictly over analog and RCA connections, meaning digital setups will not receive that extra amplification. In addition, using the optical audio port requires setting your television output to PCM, and minimizing audio lag depends on using headphones that explicitly support aptX Low Latency.
Verdict: The MEE audio Connect Hub is an excellent choice for couples or late-night viewers who want private dual-headphone listening without unhooking their existing soundbar. Its generous range, included cables, and flexible analog and digital inputs make it a reliable bridge for almost any home entertainment setup.
Who Should Buy It
A great fit if you:
- Watch TV with a partner and need separate volume controls on two pairs of Bluetooth headphones.
- Want to use wireless headphones without losing your wired soundbar connection.
- Need to stream music from a smartphone or tablet into a vintage stereo receiver.
- Own an older TV with low volume output over analog jacks.
Consider something else if you:
- Use digital optical connections and need an active volume amplification boost.
- Do not own aptX Low Latency headphones and are sensitive to minor dialogue lag.
FAQ
Can I use a soundbar and Bluetooth headphones at the same time?
Yes. In transmitter mode, the audio pass-through port lets you plug in an external device like a soundbar so it shares the audio signal coming from your TV.
How far does the wireless connection reach?
The adjustable antenna provides up to 98 feet of wireless coverage.
Do I need to buy separate cables to hook it up?
No. The Connect Hub includes all necessary cables for 3.5mm, RCA, and TOSLINK digital optical connections.
What TV settings are required for digital optical audio?
You must set your television audio output format to PCM for optical compatibility.
Product Details
| Brand | MEEaudio |
| ASIN | B07DPWR274 |
