Huepar Laser Level 360 Self Leveling, W04CG Upgraded 4x360° Bluetooth Construction Lazer Leveler Tool with Electric Rotating Base ＆ Large LCD Screen, 4D 16 Lines Green Cross Line Laser Level

The Huepar W04CG is a 4D green cross-line laser level equipped with an electric rotating base, designed for multi-surface layout tasks across floors, walls, and ceilings. Traditional layout work often requires manually turning the laser level to adjust targeting, but this model incorporates motorized rotation that can be controlled remotely. It is built for commercial contractors, residential remodelers, and precise DIYers who need complete room alignment from a single setup location.

At the core of the tool are four full 360-degree laser planes that project green laser lines across the room. The bottom laser plane sits just 0.5 inches above the ground, making it practical for leveling floor tiles and lower wall trim without requiring awkward positioning setups. When additional height clearance is needed, the included lifting base adjusts the beam from 1 inch up to 3.54 inches. Dual 90-degree vertical lines facilitate quick square layouts in corners and adjacent walls. To fine-tune alignment from a distance, the integrated motorized base turns at three set speeds (9.1mm/s, 48mm/s, and 240mm/s) using either the included remote or a mobile app from up to 65 feet away.

System settings and operational status are monitored on a backlit LCD touchscreen designed to respond even when operating with work gloves. The screen displays real-time data including tilt angle, rotation speed, battery charge level, and active laser modes. Users can toggle between self-leveling mode, manual mode for angled projections, and pulse mode. In pulse mode, pairing the unit with an optional Huepar laser receiver extends the working range up to 200 feet, or up to 400 feet when paired with the Huepar LR-8RG receiver model. The outer body features a TPE rubber-coated exterior built to resist dust, rain, and impacts, supported by a detachable lanyard for drop protection.

While the feature set covers extensive layout scenarios, there are a few practical trade-offs to keep in mind. The extended-range outdoor receiver required for pulse mode in bright sun is not included and must be purchased separately. In addition, users must observe specific battery installation and charging methods, using either the Type-C port on the tool or charging the battery directly via its dedicated Type-C port and color-coded indicator light.

Verdict: The Huepar W04CG delivers thorough four-plane laser coverage alongside convenient remote-controlled motorized positioning. It is a practical solution for trade professionals and serious builders who want precise alignment and motorized speed control across medium to large job sites.

• Laser Planes: 4 x 360° green laser planes (16 lines total)
• Ground Projection Height: 0.5 inches above ground
• Lifting Base Range: 1 inch to 3.54 inches
• Motorized Base Speeds: 9.1mm/s, 48mm/s, 240mm/s
• Remote & App Range: Up to 65 feet
• Pulse Mode Range: Up to 200 feet (400 feet with LR-8RG receiver)
• Display: Backlit glove-friendly LCD touch screen
• Housing: TPE rubber-coated, dustproof, rain-resistant, impact-resistant
• Charging: Type-C ports on tool and battery pack
• Warranty: 5-year device warranty, 2-year battery warranty

A great fit if you:

• Need four-plane 360-degree laser projection to handle floor, wall, and ceiling alignment from one central location.
• Want to adjust rotation speed and beam targeting from up to 65 feet away using a remote or smartphone app.
• Install floor tiles or subflooring and require a beam that projects just half an inch off the ground.

Consider something else if you:

• Only require basic horizontal or vertical point leveling for simple picture hanging tasks.
• Plan to work exclusively outdoors in bright sunlight and do not intend to acquire a separate laser receiver.

Confirm on the listing:

• Check whether your specific jobsite tasks require an outdoor laser receiver and confirm receiver model compatibility.
• Verify the exact package contents to see which mounting accessories, remotes, and charging cables are included.
• Confirm the battery locking mechanism operation and read all charging safety guidelines prior to initial power-up.

How to compare your options: Focus on plane count, minimum ground distance, and rotation control features. If your work centers on low-level flooring or tile layouts, a 0.5-inch ground projection provides distinct alignment benefits. If you work independently on large job sites, motorized rotation and remote control save repeated trips across the room.

Before plugging in the battery, carefully review the included battery safety instructions. You can charge the power pack while installed in the laser tool via the Type-C port, or remove the pack and plug directly into its standalone Type-C charging port. The LED indicator on the battery turns from red to green once charging is complete.

When removing the battery from the tool body, remember to press the unlock button buckle before pulling the pack from its groove to prevent damage to the latching mechanism. Attach the included lanyard during elevated positioning to protect against accidental drops.

For high-brightness or outdoor environments, activate pulse mode on the glove-friendly touchscreen panel and pair the level with a compatible Huepar laser receiver to maintain beam detection over longer distances.

How do I know when the battery is fully charged?
When charging the battery independently through its Type-C port, the built-in power indicator displays a red light while charging and changes to green when fully charged.

Can the LCD touchscreen be operated while wearing work gloves?
Yes, the responsive touch interface is built to work even when operating the screen with work gloves on.

What is the maximum distance for remote controlling the motorized base?
The electric rotating base can be controlled using either the mobile app or the included remote control from up to 65 feet away.

Is an outdoor laser receiver included in the package?
The laser tool supports pulse mode for long-distance outdoor use, but compatible laser receivers (such as the LR-8RG) are sold separately.

How close to the floor can the bottom laser line project?
The bottom laser plane projects at 0.5 inches above the floor, and can be raised from 1 inch to 3.54 inches using the included lifting base.