Beatbot Sora 10 Cordless Pool Vacuum Robot for Inground & Above Ground Pools, 6800 GPH Suction, Floor/Wall/Waterline/Shallow Area Cleaning, Waterline Parking, 300 Mins Runtime Royal Blue

Cordless pool vacuum robot designs usually force pool owners to choose between runtime and thorough coverage, but the Beatbot Sora 10 targets both with high suction and extended battery life. Built for inground and above ground installations, it handles regular pool basins as well as complex profiles with sun ledges. Its internal 7310mAh battery delivers up to 300 minutes of continuous run time, allowing it to cover spaces measuring up to 3,229 square feet without stopping for a recharge.

Debris collection relies on a 6,800 GPH suction rate paired with a HydroBalance structure. This internal layout keeps the machine steady across the pool floor while pulling in leaves, sand, and fine grit without clogging. The five-liter internal debris container holds up to 650 leaves, which minimizes how often you have to stop and dump collected waste during a cleaning cycle. For pool owners facing microscopic particles, the system is also compatible with an optional 3-micrometer ultra-fine filter.

Coverage goes beyond basic floor vacuuming. The unit climbs walls, scrubs along the waterline, and can maneuver through shallow zones as shallow as 12 inches deep. This shallow-water capability allows it to clean tanning ledges and steps that usually require manual brushing. Once its session ends, smart waterline parking directs the unit back to the pool edge, where it rests for 10 minutes at the surface so you can lift it out without diving or using reaching poles.

Physical handling benefits from balanced internal weight distribution, making the unit manageable to carry, lower into the water, and retrieve. Ongoing control is managed through an app using Wi-Fi or Bluetooth connections, which also delivers over-the-air updates to refine features over time. For water compatibility, corrosion-resistant engineering keeps it fully safe for saltwater pools with salt concentrations below 5,000 ppm NaCl.

As with any automated cleaner, there are specific boundaries to keep in mind. Ultra-fine 3-micrometer filtration is supported but sold as an optional add-on, meaning the standard setup focuses primarily on routine leaf and sand collection. In addition, getting the most from scheduling and over-the-air performance updates relies on maintaining a stable Wi-Fi or Bluetooth connection.

Verdict: The Beatbot Sora 10 is an excellent match for owners of large inground or above ground pools who want multi-surface scrubbing, tanning ledge coverage, and hands-off waterline retrieval. Those with basic splash pools or no interest in app controls may prefer a simpler, lower-capacity alternative.

• Suction Rate: 6,800 GPH
• Battery Capacity: 7310mAh
• Maximum Runtime: Up to 300 minutes
• Maximum Pool Coverage: 3,229 sq.ft (300 sq.m)
• Minimum Water Depth: 12 inches
• Debris Basket Capacity: 5 liters (holds up to 650 leaves)
• Optional Filter Rating: 3 µm
• Wireless Connectivity: Wi-Fi, Bluetooth
• Water Compatibility: Saltwater safe (NaCl under 5,000 ppm)
• Warranty Coverage: 2-year protection

A great fit if you:

• Own a large inground or above ground pool measuring up to 3,229 square feet that demands uninterrupted multi-hour cleaning cycles.
• Have sun shelves, tanning ledges, or shallow areas as low as 12 inches that require automated scrubbing without manual brushing.
• Want easy removal from the pool edge using automated waterline parking rather than fishing around with a deep pool hook.
• Maintain a saltwater pool setup with salinity levels operating beneath the 5,000 ppm NaCl threshold.

Consider something else if you:

• Need a basic, manual suction cleaner that runs directly off your existing pool pump lines without charging a battery.
• Prefer an entry-level compact vacuum designed strictly for small, temporary above ground plunge pools.

Confirm on the listing:

• Check whether the 3-micrometer ultra-fine filter basket is bundled in your package or needs to be purchased separately.
• Measure the shallowest sections of your sun shelves or tanning steps to verify they meet the 12-inch depth requirement.
• Check your pool water chemistry to verify your salt level remains safely under 5,000 ppm NaCl if using a saltwater system.
• Confirm that your home Wi-Fi or mobile Bluetooth signal reaches the pool area for app setup and over-the-air updates.

How to compare your options: Pool cleaning robots differ primarily by runtime, suction volume, and the pool zones they can reach. This model combines 300 minutes of continuous runtime and 6,800 GPH suction with floor, wall, waterline, and shallow-ledge capability. Compare these specifications against your pool surface area, elevation steps, and depth variations to ensure the cleaner covers your entire pool profile without stopping short.

• Empty and rinse the five-liter debris basket promptly after completing a cleaning session to maintain clear suction for the next cycle.
• Take advantage of the 10-minute waterline parking window at the end of the run to lift the cleaner out with minimal effort.
• Connect the cleaner to the companion mobile application through Bluetooth or Wi-Fi to keep the firmware current via over-the-air updates.
• Rinse the exterior and tracks with clean tap water after operating in saltwater to protect internal components from long-term residue buildup.
• Verify that your water level on ledges remains at least 12 inches deep before sending the cleaner across sun shelves.

Can this vacuum clean steps and shallow sun shelves?
Yes. It is engineered to navigate shallow pool areas down to a minimum depth of 12 inches, making it suitable for tanning ledges and sun shelves.

How do you pull the cleaner out of the water after a cycle?
The cleaner automatically navigates to the waterline when finished and parks there for 10 minutes, allowing you to lift it directly from the pool edge.

Is this unit compatible with saltwater pools?
Yes. It is corrosion-resistant and fully saltwater-safe as long as the salt concentration remains below 5,000 ppm NaCl.

Does it come with an ultra-fine filter?
The unit is fully compatible with a 3-micrometer ultra-fine filtration insert, but the listing notes that this filter is an optional accessory.

How large of a pool can this robot clean in a single charge?
Powered by its 7310mAh battery, it provides up to 300 minutes of runtime, covering pool surfaces up to 3,229 square feet in one continuous session.