XRDS -RF RG58 Coax CB Cable 100FT, 50 Ohm with PL-259 UHF

The XRDS-RF RG58 Coaxial Cable provides a ready-to-use 100-foot link for radio amateurs and operators setting up CB radios, ham radios, or base antennas. Designed to 50 Ohm impedance standards, it handles signal transmission across longer distances while keeping signal loss low, making it a practical choice for home stations, vehicles, and temporary field setups.

Inside the assembly, a solid copper inner conductor and PE dielectric work alongside double shielding made from aluminum foil and braided copper. This multi-layer build protects signal integrity against interference while retaining enough flexibility to route through tight corners, vehicle interiors, or compact indoor spaces without binding.

Durability is handled by a heavy-duty PVC jacket engineered to resist moisture, extreme weather, and UV rays. Both ends come pre-fitted with molded PL-259 UHF male connectors, allowing you to attach directly to compatible radios, scanners, SWR meters, and antenna equipment without soldering or buying separate adapter pieces.

The main trade-off is the fixed 100-foot continuous length. If your radio setup only spans a few feet across a desk, managing the leftover slack will require coiling. Additionally, the pre-attached PL-259 connectors mean you must have compatible UHF female ports on your hardware or source your own adapters for different port types.

Verdict: This cable is an easy recommendation for anyone needing a pre-terminated 100-foot run for CB, ham, or scanner systems. Its weather-resistant jacket and dual-shielded copper core offer a durable, plug-and-play connection right out of the box.

• Length: 100 feet
• Cable Type: RG58
• Impedance: 50 Ohm
• Conductor Material: Solid copper
• Dielectric: PE
• Shielding: Double shielded (aluminum foil + braided copper)
• Jacket Material: Weatherproof, UV-resistant PVC
• Connectors: PL-259 UHF male on both ends

A great fit if you:

• Need a full 100-foot reach between your radio hardware and an outdoor antenna.
• Want pre-installed PL-259 UHF male connectors ready to plug straight into gear.
• Operate ham radios, CB radios, scanners, or SWR meters requiring 50 Ohm RG58 coax.
• Require a flexible, UV-resistant cable suited for outdoor weather exposure.

Consider something else if you:

• Need a short jumper cable and want to avoid managing excess slack.
• Use radio gear that requires connector types other than standard PL-259 UHF plugs.

What connectors come installed on this cable?
It features pre-installed PL-259 (UHF male) connectors on both ends to connect directly into standard radio and antenna jacks.

Can this cable be routed outdoors in the sun and rain?
Yes. The outer PVC jacket is heavy-duty, moisture-resistant, and UV-resistant for long-term indoor or outdoor installations.

What devices is this coax cable compatible with?
It is built for 50 Ohm applications including CB radios, ham radios, antenna systems, scanners, and SWR meters.