AIKE Elephant Power Hand Dryer for Commercial Bathroom MatteBlack,AK2812

The AIKE AK2812 Elephant Power Hand Dryer is a heavy-duty, surface-mounted drying unit designed for commercial bathrooms and high-traffic spaces. It solves the ongoing need for quick, dependable hand drying in busy facilities where equipment must endure frequent daily use.

Performance comes from high-velocity air movement, pushing up to 115.2 cubic meters of air per hour at wind speeds reaching 145 MPH through its specialized nozzle. This concentrated airflow cuts hand-drying times down to between 8 and 12 seconds. Temperature regulation is handled automatically by a built-in sensor that activates the heating element only when ambient room temperature falls below 77 degrees Fahrenheit, consuming one-tenth the energy of conventional hot dryers when heat is not required.

Durability and setup are practical strengths of this unit. The outer housing is made from a one-piece stamped stainless steel shell finished in matte black, engineered to resist wear in tough environments. For installation, the dryer mounts directly to the wall surface using screws and includes a 55-inch power cord with a standard 3-pin plug. Facilities that prefer a clean, concealed look can easily remove the attached cord to hard-wire the unit directly into electrical lines.

As with any high-speed commercial dryer, there are clear trade-offs to keep in mind. The unit operates at an operating noise level of 76 decibels, which is typical for fast air movement but noticeable in small, quiet spaces. Additionally, it runs strictly on AC 100V-130V electrical systems at 12 amps (under 120V) and pulls between 1400W and 1650W during full operation.

Verdict: The AIKE AK2812 is an excellent choice for commercial restrooms, offices, and busy facilities that need a rugged, fast-drying fixture with flexible plug-in or hard-wired installation. It offers durable stainless steel construction backed by a two-year limited warranty.

• Voltage: AC 100V-130V, 50/60Hz
• Power Consumption: 1400W-1650W (12A under 120V)
• Drying Time: 8-12 seconds
• Airflow Speed: 145 MPH (115.2 m³/h)
• Operating Noise: 76dB
• Housing Material: One-piece stamped stainless steel
• Power Cord Length: 55 inches (with 3-pin plug)
• Warranty: 2-year manufacturer limited warranty

A great fit if you:

• Manage a high-traffic commercial restroom needing a rugged stainless steel dryer.
• Want rapid hand drying within 8 to 12 seconds.
• Need the versatility of plugging into a standard wall outlet or hard-wiring into the wall.
• Want an automated heat system that saves power in warmer ambient temperatures.

Consider something else if you:

• Need an ultra-quiet dryer for low-noise environments, as this runs at 76dB.
• Require a dryer that operates on 208V-240V commercial electrical circuits.
• Prefer continuous warm air output regardless of room temperature.

Can this dryer be hard-wired into the wall?
Yes. While it comes with a 55-inch power cord and a 3-pin plug for standard outlets, the cord can be easily removed for hard-wired installation.

How fast does it dry hands?
It produces wind speeds up to 145 MPH and lifts 115.2 cubic meters of air per hour, delivering a dry time of 8 to 12 seconds.

How does the heating feature work?
The dryer uses a smart heating system that automatically turns on the heat when the room temperature is below 77 degrees Fahrenheit and shuts it off when the room is warmer.

What is the warranty coverage?
AIKE provides a 2-year limited manufacturer warranty that includes free replacement parts and customer service support.