Clemons Concrete Coatings SuperSeal 30 High-Gloss Concrete Sealer 5-Gallon — Solvent-Based Styrene

Clemons Concrete Coatings SuperSeal 30 is a solvent-based styrene acrylic sealer designed to enhance and protect outdoor decorative masonry. Formulated with 30 percent high solids, it enriches the underlying colors of decorative cement, stamped concrete, brick pavers, and exposed aggregate, leaving behind a noticeable wet-look sheen.

A major advantage of this formula is its breathable design. Because the dried film allows internal moisture vapor to escape, surfaces are far less prone to developing a milky white haze. When applied over brick pavers, the liquid penetrates into the joints to help bind and stabilize sand, which cuts down on weed intrusion and erosion.

Application is straightforward using either a solvent-resistant sprayer or a 1/2-inch roller cover, with just one coat recommended. It covers 100 square feet per gallon on concrete pavers and up to 200 square feet per gallon on stamped concrete, depending on porosity. Surfaces are ready for foot traffic in 4 hours and vehicle traffic in 48 hours.

This sealer is not designed for every surface. It is specifically not recommended for clay pavers or plain poured concrete. Additionally, because it is a solvent-based coating, cleaning your application equipment requires A-1 Solvent or Xylene rather than soap and water.

Verdict: Clemons SuperSeal 30 is an excellent choice for homeowners and contractors seeking a high-gloss wet look on stamped concrete, acid-stained floors, or aggregate. If you need a breathable, ASTM-compliant single-coat finish that also locks paver sand in place, this 5-gallon container is well worth the investment.

• Volume: 5 Gallons
• Chemical Base: Solvent-based styrene acrylic (30% solids)
• Paver Coverage: 100 sq. ft. per gallon
• Stamped Concrete Coverage: 200 sq. ft. per gallon
• Foot Traffic Dry Time: 4 hours
• Vehicle Traffic Dry Time: 48 hours
• Standards Compliance: ASTM C-309 and ASTM C-1315
• Required Cleaners: A-1 Solvent or Xylene

A great fit if you:

• Have stamped concrete, acid-stained cement, or exposed aggregate that needs a high-gloss color boost.
• Want to lock paver joint sand in place to reduce weeds and washout.
• Need a breathable formula that helps avoid trapped moisture discoloration.
• Prefer the convenience of a single-coat application process.

Consider something else if you:

• Need to seal plain poured concrete slabs or standard driveways.
• Are working with clay pavers instead of concrete or brick.
• Do not want to handle solvent cleaners like Xylene for tool cleanup.

What tools should I use to apply this sealer?
You can apply it using a solvent-resistant sprayer or a 1/2-inch roller cover.

How many coats are required?
Only one coat is recommended for proper coverage.

How long before I can walk or drive on the sealed surface?
The surface accommodates foot traffic after 4 hours and vehicle traffic after 48 hours.

How do I clean up my application equipment?
Clean all tools immediately using A-1 Solvent or Xylene.