DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

The DEWALT DWS716 is a 12-inch compound miter saw powered by a 15-amp motor, built for trim carpenters, framers, and woodworkers who need reliable cutting capacity. It is designed to handle angled cuts on molding and lumber without complicating your workflow.

A major highlight is the double-bevel setup, which tilts from 0 to 48 degrees to both the left and right. It includes built-in positive bevel stops at 0, 22.5, 33.9, and 45 degrees, allowing you to make matching bevel cuts on both ends of a board without flipping the stock around. For miter cuts, the saw pivots from 0 to 50 degrees in either direction, supported by a cam lock handle with detent override for setting specific custom angles.

Material support is another strong point thanks to the tall sliding fences. These fences allow you to cut crown molding nested up to 6-5/8 inches and support base molding up to 6-1/2 inches vertically against the fence. Accuracy remains consistent over time with the stainless steel miter detent plate, which provides 14 positive stops at common cutting positions.

Keep in mind that this is a traditional compound miter saw rather than a sliding unit, which limits cutting broad boards horizontally. The bevel range also stops at 48 degrees on either side, and the listing does not mention accessories like work clamps or a dust bag.

Verdict: The DEWALT DWS716 is an excellent choice for anyone cutting baseboards and crown molding who wants the time-saving flexibility of dual-side beveling. It offers solid capacity and quick angle adjustments for dependable framing and trim projects.

• Motor: 15-Amp
• Blade Diameter: 12-Inch
• Bevel Capacity: 0 to 48 degrees (left and right)
• Bevel Positive Stops: 0, 22.5, 33.9, and 45 degrees
• Miter Capacity: 0 to 50 degrees (left and right)
• Miter Positive Stops: 14
• Vertical Base Molding Capacity: Up to 6-1/2 inches
• Nested Crown Molding Capacity: Up to 6-5/8 inches
• Plate Material: Stainless steel

A great fit if you:

• Cut tall baseboards up to 6-1/2 inches standing vertically against the fence.
• Work with nested crown molding up to 6-5/8 inches.
• Want to bevel in both left and right directions without turning long boards around.
• Need fast angle changes using 14 preset miter stops.

Consider something else if you:

• Need a sliding rail design to crosscut exceptionally wide flat boards.
• Require bevel angles that tilt beyond 48 degrees.

What is the bevel range on this miter saw?
The saw bevels from 0 to 48 degrees to both the left and right, with positive stops located at 0, 22.5, 33.9, and 45 degrees.

What size trim can the tall fences support?
The tall sliding fences support base molding up to 6-1/2 inches placed vertically and nested crown molding up to 6-5/8 inches.

What is the maximum miter angle available?
The saw provides a miter cutting range of 0 to 50 degrees to both the left and right, controlled with a cam lock handle and detent override.