Vanwoke
Pneumatic Rivet Gun,Air Rivet Gun with 3/16",5/32", 1/8"and 3/32" Nose
Disclosure: We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
Highlights
- Variety Of Sizes: Equipped with 3/16inch (4.8 mm), 5/32inch (4 mm), 1/8inch (3.2 mm), 3/32inch (2.4 mm) nose cones, and 3 rivet heads are included. Aluminum pop rivets are available in a variety of sizes, 10 each of 3/32*1/4, 1/8*3/8, 5/3*21/2, 3/16*3/4, for a total of 40 pieces.The rivet mouth must be precisely matched to the rivet specifications. Mismatching will directly cause the rivet to jam and fail to feed.
- Air Hydraulic Drive Advantage: The Power Riveter has a pulling force of 1912.5 lbs. and an air-hydraulic drive design for strength and durability. A quick-release air valve allows the cylinders to return quickly for high-speed assembly, and the air pressure requirement of 6.2 kgf/cm² prevents overloading and extends service life.Pneumatic working pressure: 0.6–0.8 MPa ( 6–8 bar)
- Three-Piece Steel Teeth: Three-piece steel teeth provide superior hardness, wear resistance, and high pulling force for stainless steel nails.16 mm working stroke for different rivet lengths.When using a rivet longer than the rivet holder, if the rivet fails to eject after the first trigger pull, try pulling the trigger 2-3 more times.
- Ergonomic Design: The handle is ergonomic and comfortable to hold. The use of vibration-free technology reduces work errors. Special muffling hole design to discharge excess gas and reduce noise, and compact appearance for easy use in small spaces.
- Wide Range Of Applications: suitable for all kinds of metal plates, tubes, cabinets, box manufacturing and industrial fastening, in the decoration, automobile manufacturing, containers, electrical appliances, household appliances, meters, bags and machinery manufacturing and other industries are widely used.
Why You'll Love It
- Delivers 1912.5 pounds of pulling force to fasten tough materials including stainless steel nails
- Comes with four nose cone sizes to handle standard rivet diameters from 3/32 to 3/16 inch
- Quick-release air valve resets the cylinder rapidly for faster repetitive assembly work
- Three-piece steel teeth grip firmly and resist wear during heavy fastening tasks
- Built-in muffling hole releases excess exhaust gas to help lower operating noise
- Includes a starter pack of 40 aluminum pop rivets across four common sizes
Pros
- +Strong 1912.5 lb pulling capacity
- +Includes 4 nose sizes and 40 rivets
- +Quick cylinder return speeds up work
- +Compact body fits in tight spots
- +Exhaust muffling hole lowers noise
Cons
- -Requires a compressor supplying 0.6 to 0.8 MPa
- -Jams if nose cone size does not match rivet precisely
- -Long rivets may require multiple trigger pulls
Detailed Review
The Vanwoke Pneumatic Rivet Gun is an air-hydraulic fastening tool designed to tackle sheet metal, automotive panels, and general fabrication without the hand fatigue of manual riveters. Delivering 1912.5 pounds of pulling force, it offers the muscle needed for industrial fastening across metal plates, ducting, cabinets, and appliances.
A notable strength is its versatile nose setup. The tool includes four interchangeable nose cones (3/32, 1/8, 5/32, and 3/16 inch) along with three rivet heads and an assortment of 40 aluminum pop rivets. Inside, a three-piece steel jaw system grips nails firmly, providing the wear resistance required to pull tough stainless steel fasteners. The 16 mm working stroke accommodates a variety of rivet lengths, while a quick-release air valve rapidly resets the cylinder for continuous, high-speed assembly lines.
Operation remains user-friendly thanks to an ergonomic handle and integrated vibration-free technology. To keep the workspace more manageable, a dedicated muffling hole vents excess exhaust gas to help quiet the tool down. Its compact housing makes it practical for reaching inside tight enclosures, boxes, and vehicle frames.
Keep in mind that pneumatic tools require specific operating conditions. This riveter relies on a steady air supply between 0.6 and 0.8 MPa (6 to 8 bar, or roughly 6.2 kgf/cm²). You must also ensure the installed nose cone matches your rivet diameter exactly, as any mismatch will cause feeding jams. Furthermore, if you work with fasteners longer than the rivet holder, clearing the spent mandrel may take two or three consecutive trigger pulls.
Verdict: The Vanwoke air riveter is a solid choice for workshops, auto fabricators, and metalworkers who need dependable pulling force and multi-size capability. If you already have an air compressor running at standard shop pressures, this kit gives you a complete, ready-to-use riveting setup.
Specifications
- Brand: Vanwoke
- Pulling Force: 1912.5 lbs
- Working Stroke: 16 mm
- Operating Air Pressure: 0.6-0.8 MPa (6-8 bar / 6.2 kgf/cm²)
- Nose Cone Sizes: 3/32 inch (2.4 mm), 1/8 inch (3.2 mm), 5/32 inch (4 mm), 3/16 inch (4.8 mm)
- Internal Mechanism: Three-piece steel teeth, air-hydraulic drive
- Included Rivets: 40 aluminum pieces (10 each of 3/32*1/4, 1/8*3/8, 5/3*21/2, 3/16*3/4)
Who Should Buy It
A great fit if you:
- Regularly fasten metal plates, auto panels, appliances, or enclosures and need pneumatic power.
- Work with various fastener diameters from 3/32 inch up to 3/16 inch.
- Need the pulling strength to handle stainless steel nails without straining your hands.
- Have a compressor that delivers 0.6 to 0.8 MPa operating pressure.
Consider something else if you:
- Do not own or plan to run a compatible air compressor setup.
- Frequently switch fastener sizes on the fly without wanting to swap matched nose pieces.
FAQ
What air pressure does this rivet gun require?
It operates at a pneumatic working pressure between 0.6 and 0.8 MPa (6 to 8 bar), with a recommended requirement of 6.2 kgf/cm² to prevent overloading.
What sizes of rivets can it pull?
It includes nose cones for four sizes: 3/32 inch (2.4 mm), 1/8 inch (3.2 mm), 5/32 inch (4 mm), and 3/16 inch (4.8 mm).
What should I do if a long rivet does not eject on the first pull?
When using a rivet longer than the holder, pull the trigger 2 to 3 additional times to complete the cycle and eject the stem.
Can this tool pull stainless steel rivets?
Yes, the three-piece steel teeth provide the hardness and high pulling force necessary to pull stainless steel nails.
Product Details
| Brand | Vanwoke |
| ASIN | B0F1YCN6NP |
