3U Server Cabinet Case 19" Rack Mount Lockable Drawer with Key

The Followme 3U Lockable Server Cabinet Drawer provides dedicated, secure storage inside any standard 19-inch network cabinet, server rack, or compatible enclosure. It takes up 3U of rack space and is designed to store tools, accessories, and small hardware securely under lock and key.

Built from powder-coated cold rolled steel, the drawer is capable of supporting up to 22 pounds of gear. It offers internal usable measurements of 16.15 inches wide by 12.52 inches deep by 4.65 inches high, extending outward by 11.8 inches for convenient access to your contents. At the rear, three dedicated cable management holes with protective rubber rings allow wiring to pass through safely without suffering edge damage.

Setup is straightforward because the main drawer body arrives pre-assembled. You only need to attach the two holding sides using the provided hardware, then mount the unit to your enclosure with the included set of four M6 screws and cage nuts.

In terms of limitations, the unit supports a maximum load of 22 pounds, so it is not built for heavy hardware or dense equipment. Buyers must also assemble the side brackets before installation, and the listing does not mention the number of keys provided.

Verdict: This 3U lockable drawer is an effective storage solution for anyone managing a 19-inch server rack who needs secure, enclosed organization for lighter accessories and tools. It delivers sturdy steel construction, built-in cable pass-throughs, and all necessary mounting hardware.

• Rack Space: 3U
• External Dimensions: 19 in W x 12.69 in D x 5.2 in H
• Internal Dimensions: 16.15 in W x 12.52 in D x 4.65 in H
• Drawer Extension: 11.8 in
• Material: Cold rolled steel with powder coating
• Weight Capacity: 22 lbs
• Rack Compatibility: 19-inch server racks, network cabinets, and enclosures
• Package Contents: 1 x 3U drawer, 2 x holding sides, assembly screws, 4 x M6 screws and cage nuts, key

A great fit if you:

• Need lockable, enclosed storage inside a standard 19-inch server rack or network cabinet.
• Want rear cable routing holes with protective rubber rings for internal wiring.
• Have tools, drives, or accessories weighing up to 22 pounds to organize.
• Prefer a mostly assembled unit that includes M6 mounting screws and cage nuts.

Consider something else if you:

• Need to store heavy hardware exceeding the 22-pound limit.
• Require a drawer for a non-standard or non-19-inch enclosure.

What are the internal dimensions of the drawer?
The internal usable space measures 16.15 inches wide by 12.52 inches deep by 4.65 inches high.

How far does the drawer slide out?
The drawer extends outward up to 11.8 inches for access to stored items.

What mounting hardware comes in the box?
The package includes screws to attach the holding sides, as well as four M6 screws and cage nuts for mounting into your rack.

How much weight can this drawer hold?
It has a maximum loading weight capacity of 22 pounds.