30 Pack Hold Down Clamp for Basket Wire Mesh Cable Tray, Support

The OTTFF Hold Down Clamps are dedicated mounting hardware pieces designed to secure basket wire mesh cable trays in place. They work by anchoring trays either directly to the ground or onto stand-off brackets, making them useful for anyone setting up organized routing pathways for wiring runs.

Each clamp is fabricated from 1/16-inch thick low carbon steel finished with an electrogalvanized coating. They are dimensioned specifically to fit wire mesh baskets with wire diameters ranging from 0.157 inches to 0.236 inches, helping ensure a tight, fitted hold around compatible wire gauges.

For attachment, each bracket includes a single slotted hole sized for a 5/16-inch bolt. Keep in mind that the package includes only the 30 hold down clamps; mounting bolts, stand-off brackets, and the cable trays themselves must be sourced separately. In addition, trays featuring wire gauges outside the 0.157 to 0.236-inch range will not fit properly.

Verdict: The OTTFF 30-pack is a solid, straightforward hardware choice for installers needing to anchor compatible wire mesh cable trays. If your setup uses 0.157 to 0.236-inch wire diameters and 5/16-inch fasteners, this pack covers your mounting needs.

• Brand: OTTFF
• Quantity: 30 pieces
• Material: Low carbon steel
• Finish: Electrogalvanized
• Thickness: 1/16 inch
• Compatible Wire Diameter: 0.157 inch to 0.236 inch
• Hole Type: 1 slotted hole for 5/16-inch bolt
• Mounting Applications: Ground or stand-off brackets

A great fit if you:

• Need to secure basket wire mesh cable trays to floors or stand-off brackets.
• Are installing mesh trays with wire diameters between 0.157 and 0.236 inches.
• Require a 30-piece pack for your hardware installation.

Consider something else if you:

• Use cable trays with wire diameters thicker than 0.236 inches or thinner than 0.157 inches.
• Need an all-in-one kit that includes 5/16-inch mounting bolts.

What size bolt fits into these clamps?
Each clamp features a single slotted hole designed for a 5/16-inch bolt.

What wire thickness do these clamps support?
They fit basket wire mesh cable trays with wire diameters ranging from 0.157 inches to 0.236 inches.

What material are the clamps made of?
They are manufactured from 1/16-inch thick low carbon steel with an electrogalvanized finish.