Xuoxeji
8 PCS Flame Guard Corner Hardware, Fire Pit Flame Wind Glass Guard
Disclosure: We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
Highlights
- 【Heavy-duty aluminum alloy corner hardware】Flame guard corner hardware made of aluminum alloy that is fire, corrosion and wear resistant. Smooth brushed surface with rounded edges helps protect tempered glass and hands, suitable for long-term outdoor use.
- 【8 pcs C type mounting clips kit only】Package includes 4 top C type corner glass clips, 4 bottom C type clips with non-slip aluminum feet, screws and pads. These fire pit glass clamps create a glass wind guard connector kit – glass panels NOT included.
- 【Fits 5/16'' (8 mm) tempered glass】Each connector is approx. 1.5 x 0.9 x 0.6 in (3.8 x 2.2 x 1.6 cm). The C slot holds 5/16 inch tempered glass wind guard panels; not suitable for thin or over-thick glass. Please confirm glass thickness before ordering.
- 【Fire pit flame wind glass guard parts】A fixed glass wind guard keeps the flame steady on windy days and helps reduce fuel loss. Use these corner connectors to build or repair rectangle glass wind guards for gas fire pit burner pans and patio fireplaces.
- 【Easy DIY installation】Have tempered glass cut to size, slide the panels into the C type clips, tighten the screws and place the windbreak fence around your gas fire table or patio fire pit. Quick assembly lets you refresh an old windshield in minutes.
Why You'll Love It
- Resists fire, corrosion, and wear with heavy-duty aluminum alloy construction
- Protects glass panels and hands from scratches using smooth brushed surfaces and rounded edges
- Stabilizes fire table setups with non-slip aluminum feet on bottom clips
- Maintains steady burner flames and reduces fuel loss on windy days
- Assembles quickly by sliding panels into slots and tightening the included screws
Pros
- +Heavy-duty aluminum alloy build
- +Includes non-slip bottom feet
- +Complete 8-piece connector kit
- +Quick screw-tightened assembly
Cons
- -Glass panels not included
- -Only fits 5/16-inch thick glass
Detailed Review
The Xuoxeji 8 PCS Flame Guard Corner Hardware set provides the essential brackets needed to build or repair a rectangular wind barrier for patio fire tables and gas burner pans. A secure glass guard helps steady active flames during breezy weather, which also aids in reducing fuel loss. This set is aimed at homeowners seeking replacement brackets or building a custom wind screen from scratch.
Constructed from aluminum alloy, these C-shaped clamps offer resistance against fire, corrosion, and everyday wear for outdoor use. The hardware features a brushed finish with rounded edges designed to prevent cuts and safeguard the edges of your tempered glass. The eight-piece set includes four top clips and four bottom clips, with the bottom units featuring built-in non-slip aluminum feet to keep the assembly resting securely on your fire pit ledge.
Installation is straightforward and requires minimal effort. Once you have your tempered panels ready, you simply slip the glass into the C-shaped channels, secure them with the included screws and protective pads, and position the frame around the burner. This quick setup allows you to refresh an existing windshield or build a new one in minutes.
Before purchasing, keep in mind that this package contains only the mounting hardware, pads, and screws; the tempered glass panels must be purchased separately. Compatibility is also strictly limited to 5/16-inch (8 mm) thick glass. Thinner or thicker panels will not fit properly into the 1.5 by 0.9 by 0.6 inch connector slots.
Verdict: This hardware kit is a practical, budget-conscious choice for anyone building or fixing a rectangular fire pit wind screen. If you already have or plan to cut 5/16-inch tempered glass panels, it provides all the corrosion-resistant brackets and non-slip feet needed for a sturdy setup.
Specifications
- Brand: Xuoxeji
- Material: Aluminum alloy
- Finish: Brushed with rounded edges
- Piece Count: 8 mounting clips (4 top, 4 bottom with feet)
- Compatible Glass Thickness: 5/16 inch (8 mm)
- Connector Dimensions: Approx. 1.5 x 0.9 x 0.6 in (3.8 x 2.2 x 1.6 cm)
- Included Accessories: Screws, pads, non-slip aluminum feet
Who Should Buy It
A great fit if you:
- Need to repair an existing rectangular glass wind guard on a gas fire pit.
- Are sourcing your own 5/16-inch (8 mm) tempered glass for a custom DIY build.
- Want outdoor-rated aluminum alloy brackets with integrated non-slip feet.
Consider something else if you:
- Need an all-in-one kit that includes the tempered glass panels.
- Have glass panels that are thinner or thicker than 5/16 inch (8 mm).
FAQ
Does this kit include the tempered glass panels?
No, the package only contains the 8 mounting clips, screws, pads, and non-slip feet. Glass panels must be obtained separately.
What glass thickness fits these clamps?
These connectors are designed specifically for 5/16-inch (8 mm) tempered glass panels and will not work with thinner or thicker glass.
What components are included in the package?
You get 4 top C-type corner clips, 4 bottom C-type clips equipped with non-slip aluminum feet, plus the necessary screws and pads for assembly.
Product Details
| Brand | Xuoxeji |
| ASIN | B0BV69MCCL |
