HONGDUI DJ11S 2-in-1 Chamfer & Radius Plane,1/32"(5mm) Depth Adjustable, Aluminum Alloy Edge&Radius

The HONGDUI DJ11S 2-in-1 Chamfer and Radius Plane is an aluminum alloy edge-trimming tool designed to shape board corners. It serves woodworkers who need consistent corner softening without switching between dedicated hand tools or setting up power equipment.

Its double-blade configuration allows you to cut a 45-degree bevel and an R3 (1/8-inch) round profile simultaneously. The tool utilizes four-sided integrated blades that feature two right-angle edges and two curved edges. Because these blades work straight out of the box without traditional sharpening, you can switch edges when one dulls.

Depth control is managed through a large adjustment dial marked in both millimeters and inches, supporting depth settings up to 1/32 inch (5mm). For convenience on the job, the plane includes three total blades (two pre-installed on the sides and one stowed inside the central adjustment knob) along with two backup screws mounted directly to the upper right side of the body.

A natural trade-off is its specialized scope. The cutter profiles are fixed to 45-degree angles and R3 curves, so it will not produce custom bevel angles or larger roundover radii beyond its designated 5mm maximum cutting depth.

Verdict: The HONGDUI DJ11S is a well-engineered option for woodworkers seeking quick 45-degree and R3 edge treatments. It offers convenient blade storage and precise dual-scale depth control in a single compact hand tool.

• Material: Aluminum alloy
• Max Depth Adjustment: 1/32 inch (5mm)
• Chamfer Profile: 45-degree straight chamfer
• Radius Profile: R3 (1/8 inch) round chamfer
• Included Blades: 3 (4-sided integrated design)
• Spare Hardware: 2 mounted spare screws

A great fit if you:

• Need consistent 45-degree bevels and R3 round edges on timber projects
• Prefer disposable multi-sided blades over manual sharpening stones
• Want spare hardware and an extra blade integrated directly onto the tool

Consider something else if you:

• Require custom chamfer angles other than 45 degrees
• Need roundover cuts larger than an R3 (1/8-inch) radius
• Require a cutting depth greater than 5mm (1/32 inch)

How many blades are included with the tool?
The plane comes with three blades: two are installed on the sides of the tool, and one is stored inside the center adjustment knob.

What edge profiles does the blade create?
Each four-sided blade features two right-angle cutting edges for 45-degree straight chamfering and two curved edges for R3 (1/8-inch) round chamfering.

How is the cutting depth adjusted?
Depth is adjusted by turning the large knob on the tool body, which features both imperial (inch) and metric (mm) markings up to 1/32 inch (5mm).