MOOKEERF
MOOKEERF PL259 UHF Cable 35ft, KMR400 PL259 Male to Male Coaxial Cable
Disclosure: We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
Highlights
- 【LOW LOSS 】- The loss of 35ft KMR400 pl259 coaxial cable at 450MHZ signal frequency is less than 1.11dB and the SWR ≤ 1.25. It is a low loss uhf coax cable with PL259 plugs on the both ends. There is no need to worry about signal loss for long-distance high-frequency use.
- 【Well Built Structure】- The inner conductor of this pl259 cable is made of copper clad aluminium, and the outer conductor is made of Aluminum foil and tinned copper braid which could maximum protect the signal over large distance. This KMR400 coaxial cable is equivalent to lmr400 and rg8u.
- 【Prevent Fall Apart or Break】- Connection between UHF male connector and KMR400 coaxial cable end is equipped with a 2.2" heat shrink tube with lined adhesive which is longer than other cable 's 1.1” heat shrink tube . And the connector is use clamp design.UHF connectors are well integrated into the cable to avoid easy breakage during use.
- 【Great Quality and Durable】 - The jacket of this cb cable is made of PVC,which is waterproof .The connector shell made of copper nickel plating has good corrosion resistance. The shrink tubing of this jumper is built with an adhesive inner wall, sealing against moisture. It is very sturdy that could work well in outdoor environment.
- 【Applications】- This pl259 male to male coax cable could be used for CB ham radio, HF amateur radio, marine boat VHF radio, antenna, swr meter, surge protector, Walkie Talkies.
Why You'll Love It
- Delivers low signal loss under 1.11dB at 450MHz across a 35-foot run
- Shielded with aluminum foil and tinned copper braid for strong signal protection
- Reinforced with 2.2-inch adhesive heat shrink tubing to prevent connector separation
- Weather-ready PVC jacket and nickel-plated copper shell resist moisture and corrosion
- Works across CB, HF amateur, marine VHF radios, SWR meters, and antennas
Pros
- +Low signal loss under 1.11dB at 450MHz
- +Long 2.2-inch adhesive heat shrink reinforcement
- +Waterproof PVC jacket for outdoor setups
- +Double shielding with foil and tinned braid
- +Clamp connector design prevents breakage
Cons
- -Fixed 35-foot length cannot be adjusted
- -Fitted strictly with male UHF connectors on both ends
Detailed Review
The MOOKEERF PL259 UHF Cable is a 35-foot KMR400 coaxial jumper designed to connect radio gear over long distances without degrading your signal. It solves the common problem of high-frequency signal drop and weak connector joints, making it a dependable choice for ham operators, CB users, and marine boaters alike.
Internally, the cable uses a copper-clad aluminum center conductor surrounded by aluminum foil and a tinned copper braid. This KMR400 build is equivalent to LMR400 and RG8U specs, keeping the signal loss under 1.11dB at 450MHz with an SWR of 1.25 or less. This shielding design ensures clean signal transmission whether you are running gear on HF amateur bands or higher-frequency setups.
The build quality focuses heavily on outdoor readiness and joint strength. Each end features a UHF male PL259 plug secured by a clamp design and protected by a 2.2-inch heat shrink tube lined with adhesive. Coupled with a waterproof PVC outer jacket and corrosion-resistant copper nickel-plated shells, the assembly seals out moisture and prevents the cable from breaking apart under strain.
Keep in mind that this cable comes pre-terminated at a fixed 35-foot length with PL259 male plugs on both ends. If your equipment requires right-angle connectors, different lengths, or alternate interface types like BNC or N-type, you will need compatible adapters.
Verdict: This cable is an excellent pick for radio hobbyists and mariners needing a durable, low-loss 35-foot line for antennas, transceivers, and SWR meters. It provides reliable signal protection and reinforced joints for long-term outdoor or indoor use.
Specifications
- Length: 35 feet
- Cable Type: KMR400 (equivalent to LMR400, RG8U)
- Connector Type: PL259 UHF Male to Male (clamp design)
- Inner Conductor: Copper-clad aluminum
- Outer Shielding: Aluminum foil and tinned copper braid
- Jacket Material: Waterproof PVC
- Connector Shell: Copper nickel plating
- Heat Shrink Tube: 2.2 inches with adhesive lining
- Signal Loss: Less than 1.11dB at 450MHz
- SWR: ≤ 1.25
Who Should Buy It
A great fit if you:
- Need a durable 35-foot run for CB or HF amateur radio gear.
- Require low-loss transmission with an SWR rating of 1.25 or lower.
- Operate outdoor marine boat VHF radios or external antenna setups that need moisture sealing.
- Connect antennas through surge protectors or SWR meters using UHF male connections.
Consider something else if you:
- Require a different cable length or custom-cut sizing.
- Use radio gear that relies on female jacks or non-UHF connector types.
FAQ
What is the signal loss rating for this 35-foot cable?
The cable has a signal loss of less than 1.11dB at a 450MHz frequency, with an SWR of 1.25 or less.
Can this cable handle outdoor installation?
Yes. It features a waterproof PVC jacket, corrosion-resistant copper nickel-plated connector shells, and 2.2-inch heat shrink tubing lined with adhesive to seal out moisture.
What devices are compatible with this cable?
It works with CB ham radios, HF amateur radios, marine VHF radios, walkie-talkies, antennas, SWR meters, and surge protectors that use UHF connections.
What cable standard is KMR400 equivalent to?
KMR400 is equivalent to RG8U and LMR400 coaxial cables.
Product Details
| Brand | MOOKEERF |
| ASIN | B089D5VQFK |
