Beaquicy
2 Pack 8269145 Dishwasher Mounting Bracket with Screws - Fit for Whirlpool
Disclosure: We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
Highlights
- γπππππππ ππππππππππ ππππππππ πππππππγ- 8269145 dishwasher mounting bracket for whirlpool is used to secure dishwasher to the underside of counter. Bracket wp8269145 can prevents the dishwasher from tipping over when slide out the rack. The mounting bracket is approximately 2.99"(L) x 1.02"(at the widest). Includes 2 x 8269145 Dishwasher Upper Bracket, 2 x Silver Installation Screw
- γππππ ππππππππππγ- Bracket 8269145 replaces WP8269145VP, 830941,AP6012289, PS11745496, EAP11745496, WP8269145. The 8269145 dishwasher bracket mounting fits for most top name brands like Whirlpool, Sears, Kenmore, Jenn-Air, Amana, Crosley, Maytag, Estate, Magic-Chef, Inglis, Roper and other brands. 8269145 dishwasher side mounting bracket Compatible: adb1500adw2, kuds35fxss5, wdta75sahn, wdt780saem1, wdt750sahz0, 66512413N412, 66512833K314, 66514752N510, 66514833N510, wdf520padm7, wdt730pahz0, kdfe104hps, kude20fxss4, mdb8989shb, 7gu3800xtvy0, 7gu3800xtvy2, cud6710xb0, etc
- γπππππππππγ- The 8269145 undercounter dishwasher bracket is made of high-quality galvanized steel materials and well test by the manufacturer, meets OEM standards, robust, ensure long-lasting and superior performance. The upgraded 8269145 Dishwasher Bracket is stronger and less prone to bending, more resistant to water vapour in the dishwasher and less likely to break due to rusting and becoming brittle
- γπ ππ ππππππππγ- The 8269145 Undercounter Dishwasher Bracket Replacement can solve the following problems: Door wonβt close, Dishwasher shakes, Dishwasher dumps forward, Dishwasher falling off cabinet. Replace the dishwasher bracket in time will better withstand the weight of the dishwasher and fit better into the cabinet
- γππππππππππππ ππππγ- Disconnect your dishwasher from its power and water source before starting the 8269145 whirlpool dishwasher mounting bracket. If hose and power cord donβt have enough slack, please disconnect the hose and wiring. Helpful tools include screwdriver, wrench, hex head screwdriver, and a towel. Determine the position of the mounting bracket, insert the mounting bracket into the dishwasher rack, tighten the screws through the round holes in the bracket and secure it in the cabinet. You can follow the relevant installation videos on YouTube and it will only take a few minutes to install
- γπ ππ ππππππγ- The 8269145 Undercounter Mounting Bracket can also fit the following models: DU1055XTSS3, GU2475XTVB0, GU2475XTVQ0, GU2475XTVY0, KUDE20IXSS3, KUDE40FXBL3, KUDS30CXSS4, UDE40FXBT3, KUDE40FXSS3, KUDE40FXSP3, KUDE40FXPA3, WFG381LVQ3, WFG381LVS3, KUDS30FXPA3, KUDS30CXWH4, KUDS30FXBL3, KUDS30CXBL4, KUDS30FXSS3, KUDS30FXWH3, KUDS30SXWH2, KUDS30HXSS0, KUDS35FXBL3, KUDS35FXSS3, KUDS35FXWH3, KUDS30SXBL2, KUDS30SXSS2, GU2275XTVY0, GU2500XTPB0, GU2500XTPB1, GU2500XTPB3, etc
- γπππ ππππ πππππππππγ- Within 365 days from the date of purchase, if there is any problem with the 8269145 Mounting Bracket with Screws, you can contact us to ask for after-sales service. If you're not sure if the 8269145 Undercounter Dishwasher Mounting Bracket is right for your dishwasher, you can contact us to help you check!
Why You'll Love It
- Secures your dishwasher directly to the underside of the counter to prevent forward tipping
- Constructed from galvanized steel to resist bending, water vapor, and rust over time
- Resolves issues like doors failing to close, unit shaking, or slipping from cabinetry
- Works across major brands including Whirlpool, Kenmore, Maytag, Jenn-Air, and Amana
- Includes two upper brackets and two silver installation screws for a quick setup
Pros
- +Sturdy galvanized steel construction
- +Includes matching installation screws
- +Broad compatibility with major appliance brands
- +Straightforward DIY installation
- +Backed by a 365-day guarantee
Cons
- -Requires manual disconnection of power and water
- -Installation tools are not included
- -Limited to top or side undercounter mounting
Detailed Review
The Beaquicy 8269145 Dishwasher Mounting Bracket pack provides replacement hardware to anchor an undercounter dishwasher firmly to your cabinetry. If your appliance shakes during cycles, tilts forward when pulling out a loaded rack, or has trouble closing properly, these brackets restore stability. The set includes two upper brackets and two silver installation screws designed to replace common part numbers like WP8269145, AP6012289, and PS11745496.
Each bracket measures approximately 2.99 inches long by 1.02 inches wide at the widest point and is made from galvanized steel. This material resists bending under the weight of the appliance and holds up against internal water vapor, reducing the chance of rust and brittleness over extended use. By securely joining the machine frame to the countertop underside, the brackets maintain proper door alignment and keep the unit flush.
Installation takes only a few minutes with basic household tools such as a screwdriver, hex head screwdriver, wrench, and a towel. Before starting, you will need to disconnect both the water supply and electrical power, as well as ensure the hoses have enough slack. Once positioned in the dishwasher rack slot, tightening the screws through the pre-drilled round holes secures the unit firmly in place.
Keep in mind that while these brackets fit a wide selection of brands such as Whirlpool, Kenmore, Maytag, and Amana, you will need to verify your specific model number against compatible listings before purchasing. The kit provides the mounting brackets and screws, but any necessary tools or replacement supply lines must be sourced separately.
Verdict: This hardware set is a practical, direct-fit solution for homeowners needing to secure a wobbly or tilting dishwasher. If your appliance matches the supported Whirlpool-family model numbers, it offers a quick and durable fix.
Specifications
- Brand: Beaquicy
- Part Number: 8269145 (replaces WP8269145VP, 830941, AP6012289, PS11745496, EAP11745496, WP8269145)
- Material: Galvanized steel
- Dimensions: Approximately 2.99 inches (L) x 1.02 inches (widest point)
- Package Contents: 2 x 8269145 upper brackets, 2 x silver installation screws
- Coverage: 365 days after-sales support
Who Should Buy It
A great fit if you:
- Own a compatible Whirlpool, Kenmore, Maytag, Jenn-Air, or Amana dishwasher that tips forward when racks are pulled out.
- Need to replace rusted, bent, or broken original mounting brackets.
- Are comfortable using basic hand tools to secure an appliance to the underside of a cabinet.
Consider something else if you:
- Have a dishwasher brand or model not covered by the 8269145 part specification.
- Require specialized side-mounting hardware not accommodated by this bracket design.
FAQ
What problems do these brackets solve?
They address issues where the dishwasher door will not close, the machine shakes during operation, the unit tilts forward when sliding out racks, or the dishwasher slips away from the cabinet.
What comes inside the package?
The set includes two 8269145 dishwasher upper mounting brackets and two silver installation screws.
What tools are needed to install them?
A screwdriver, hex head screwdriver, wrench, and a towel are helpful for completing the installation.
What is the size of each bracket?
Each mounting bracket measures approximately 2.99 inches long by 1.02 inches at its widest point.
Product Details
| Brand | Beaquicy |
| ASIN | B0869BVFFN |
