Metabo HPT 16 Gauge Finish Nailer, Lightweight 1-2.5in, NT65M2S
Disclosure: We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more
Highlights
- AWARD: Rated the Pro Preferred Nailer for 12 years running (2014 - 2025) by Builder and Developer Magazine
- FASTENERS: 16-gauge finish nails in lengths ranging from 1-in up to 2-1/2-in
- TRIGGER: Selective actuation switch lets the user easily select bump fire or sequential fire modes
- LIGHTWEIGHT: Only 3.7 lbs and well-balanced for minimal fatigue and increased maneuverability
- DEPTH ADJUSTMENT: Tool-free depth of drive adjustment helps to provide a professional finish when fastening into varying materials
- APPLICATIONS: Ideal for installing molding, chair rail, cabinetry and other fine finish applications
- EXHAUST PORT: 360 degree, fully adjustable exhaust port directs air exhaust away from the user during use
- AIR DUSTER: Duster button to conveniently blow away dust and debris instantly to clear the work surface
- NO-MAR TIP: No-mar tip on the nose protects the work piece from unintended markings
- WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty
Why You'll Love It
- Drives 16-gauge finish nails from 1 inch to 2-1/2 inches for versatile carpentry
- Weighs only 3.7 pounds to reduce arm fatigue during overhead or extended nailing
- Switch between bump fire and sequential firing modes quickly with a selective actuation switch
- Tool-free depth adjustment lets you set precise countersinking across different materials
- Integrated air duster button clears sawdust and debris from your work surface instantly
- 360-degree adjustable exhaust port directs air discharge completely away from your face
Pros
- +Very lightweight at just 3.7 pounds
- +Switchable bump and sequential firing modes
- +Built-in air duster to clear debris
- +Tool-free depth of drive adjustment
- +Covered by a 5-year tool warranty
Cons
- -Requires an air compressor setup to operate
- -Limited to 16-gauge finish nails
Detailed Review
The Metabo HPT NT65M2S is a pneumatic 16-gauge finish nailer designed for trim carpentry, cabinetry, chair rails, and molding installations. It fastens 16-gauge finish nails ranging from 1 inch to 2-1/2 inches in length. At just 3.7 pounds, the lightweight and balanced body helps minimize hand and arm strain during repetitive overhead or long-duration fastening tasks.
Control is straightforward thanks to a selective actuation switch that allows you to swap between bump fire for quick placement and sequential fire for precise nail positioning. The tool-free depth of drive adjustment lets you flush-mount or countersink fasteners across varying wood densities without searching for extra tools. A no-mar nose tip protects delicate trim pieces from scuffs and dents.
Jobsite convenience is enhanced by a 360-degree adjustable exhaust port, which lets you direct escaping air away from yourself regardless of your working angle. The built-in air duster button provides a quick burst of air to clear saw dust and loose debris directly off your cut lines and work surface before securing trim.
As a pneumatic nailer, it relies on a compatible air supply and hose to function, which limits mobility compared to cordless battery alternatives. The fastener range is strictly dedicated to 16-gauge nails, meaning it will not accept heavier framing nails or finer 18-gauge brads.
Verdict: The Metabo HPT NT65M2S is an excellent option for woodworkers and finish carpenters who need a dependable, lightweight nailer for molding and cabinetry. Backed by a 5-year tool warranty, it offers the essential adjustments needed for clean, damage-free trim installation.
Who Should Buy It
A great fit if you:
- Install baseboards, crown molding, chair rails, or custom cabinetry
- Want a lightweight 3.7-pound pneumatic nailer to reduce arm fatigue
- Need to switch easily between bump fire and single sequential placement
- Rely on a built-in air duster to keep your nailing surface clear
Consider something else if you:
- Need to shoot 18-gauge brad nails or heavy framing fasteners
- Prefer a cordless battery system without air hoses
FAQ
What nail sizes does this finish nailer accept?
It accepts 16-gauge finish nails in lengths from 1 inch up to 2-1/2 inches.
How do you switch between bump fire and single fire?
The tool features a selective actuation switch that allows you to easily choose between bump firing and sequential firing modes.
Does this nailer include surface protection for finished trim?
Yes, it comes with a no-mar tip on the nose to prevent accidental marks and dents on your workpiece.
What warranty covers this tool?
It is covered by Metabo HPT's Professional 5-Year Tool Warranty.
Product Details
| ASIN | B07MDDT2LV |
