14" Bandsaw Trunnions with Degree Scale Fits for Most 14-Inch Wood Band Saws, Directly Replaces for JWBS-14, LBS-60, 426-02-395-0005, 426-02-0-950-0002 (Set of Two)

The Bonbo 14-Inch Band Saw Trunnion Set provides a direct replacement pair for worn or broken table support brackets on wood band saws. Over time, original trunnions can wear down or fracture, making it difficult to set or maintain table tilt angles. This set of two matching components restores the baseline support structure of your machine so your table stays steady while making bevel cuts.

Each trunnion in this set is constructed from aluminum alloy engineered for high strength, impact resistance, and protection against rust and corrosion. The design features an integrated degree scale with clear angle markings, allowing you to quickly position your bandsaw table at the exact angle required for your project. To ensure solid stability on your machine, each trunnion is built with three mounting holes spaced on 2-inch centers, which holds the assembly firmly against the workbench structure to eliminate unwanted wobbling during operation.

While this set is crafted to meet or exceed OEM standards, compatibility is specific to 14-inch wood band saws matching part numbers such as JWBS-14, LBS-60, 426-02-395-0005, or 426-02-0-950-0002. If your saw utilizes a different mounting hole spacing than 2-inch centers or requires a different size bracket, these trunnions will not fit. Additionally, the product description does not clarify whether mounting bolts or extra hardware are included, so you may need to re-use your existing fasteners.

Verdict: This replacement trunnion pair is a reliable choice for woodworkers needing to repair the tilt mechanism on compatible Delta, Jet, Ridgid, or Accura 14-inch band saws. Its aluminum alloy build and clear degree markings make it a straightforward solution for restoring accurate beveled cutting performance.

• Product Type: 14-Inch Band Saw Trunnion Set
• Quantity: Set of two trunnions
• Material: High strength Aluminum Alloy
• Mounting Configuration: 3 mounting holes per trunnion
• Hole Center Spacing: 2-inch hole centers
• Features: Integrated degree scale / angle gauge
• Compatible Brands: Fits JET, ACCURA, DELTA, and RIDGID 14-inch band saws
• Replaces Part Numbers: JWBS-14, LBS-60, 426-02-395-0005, 426-02-0-950-0002
• Guarantee: 30-day money-back return policy

A great fit if you:

• Own a compatible 14-inch wood band saw from brands such as Delta, Jet, Ridgid, or Accura that needs new table trunnions.
• Are replacing cracked or damaged original parts matching part numbers JWBS-14, LBS-60, 426-02-395-0005, or 426-02-0-950-0002.
• Want durable aluminum alloy replacement brackets that feature integrated angle scale markings to assist with accurate bevel adjustments.

Consider something else if you:

• Operate a band saw with a wheel diameter other than 14 inches or one that uses mounting hole centers different from 2 inches.
• Require a complete tilt assembly that includes mounting bolts, hardware, or table knobs not specified on this listing.

Confirm on the listing:

• Check your saw model and part manual to ensure your original trunnion matches numbers JWBS-14, LBS-60, 426-02-395-0005, or 426-02-0-950-0002.
• Measure the hole center spacing on your current band saw table base to verify it matches the 2-inch center requirement.
• Check whether your existing mounting hardware and bolts are intact, as you may need them during installation.
• Verify the 30-day refund terms and contact procedures provided by the seller in case you require support.

How to compare your options: When evaluating replacement trunnions for a 14-inch band saw, compare the material quality, mounting configuration, and scale clarity. This set utilizes an aluminum alloy structure engineered for corrosion resistance and impact strength, combined with three mounting holes on 2-inch centers to minimize table movement during cuts. If your current setup requires different hole spacing or a different mounting layout, choose a part verified for your specific machine footprint.

Before installing your new trunnions, clear any dust, debris, or pitch build-up from the mounting area on your band saw workbench. Inspect your original mounting bolts to confirm they are clean and free of damage so they thread smoothly into the three mounting holes.

When aligning the trunnions during setup, ensure the 2-inch center mounting points fit flush against your machine frame to prevent any table movement or wobbling. Tighten all hardware evenly across the three holes to maintain stability.

Keep the integrated degree scale clean by regularly wiping away sawdust after use. This keeps the angle markings legible whenever you need to adjust your table for angled cuts. If you experience any issues or have questions regarding fit, contact the seller to make use of their listed customer support.

Which band saw models are compatible with this trunnion set?
This set fits most standard 14-inch wood band saws, including models from Jet, Accura, Delta, and Ridgid. It directly replaces original part numbers JWBS-14, LBS-60, 426-02-395-0005, and 426-02-0-950-0002.

What is the distance between the mounting holes?
The trunnions feature three mounting holes designed with 2-inch hole centers for securing the part firmly to the table frame.

What material are these trunnions made from?
They are manufactured from high-strength aluminum alloy designed to resist corrosion, rust, wear, and impact while meeting or exceeding OEM specifications.

Does this set include mounting bolts or hardware?
The listing specifies that you receive a set of two trunnions, but it does not state whether replacement screws or bolts are included. You should check if you can re-use your existing table hardware.

What guarantee comes with this product?
The listing includes a 30-day money-back guarantee, allowing you to return the trunnion set within 30 days for a full refund if you are not satisfied.