How to Choose the Best Shower Head Brands
What Does GPM Mean?
GPM stands for water pressure and is measured in gallons per minute. Typically, a higher GPM value translates to more water per minute.
This value corresponds to a more substantial water current. Most sprayers are designed to operate at one of three values, such as GPM of 1.5-1.75 GPM, 2.0 GPM, and 2.5 GPM, respectively.
A pressure washer with 2.5GPM produces powerful jets of water. Usually, GPM 2.5 is strong enough that you feel them enough to feel comfortable in the shower.
Those with sensitive or thin skin more intensely want a low-flow shower. For example, the device has a pressure of 1.75 - 2.0 GPM.
Although these jets are gentler, they will take a little longer, primarily when you use them to wash your hair or remove soap from your body.
Related Post: Best Ceiling Mounted Rain Shower Head
Should I Install a Shower Head Myself?
In most cases, you can buy and install the shower yourself if you want. However, if you live in an old house and are planning to move or renovate, then think about switching to a low-flow model that ranges from 1.5 - 2.0GPM. They may have a slight mismatch between the plumbing hardware installed in the shower.
The automatic compensating valve or the type of valve that changes with the temperature of the water can sometimes cause the user to accidentally burn himself. Both of these valves are fitted into the plumbing behind the shower wall. In most homes, plumbing is designed to work with showers that have a flow rate of 2.5 GPM.
With lower-pressure showerheads, the difference between the expected water pressure is lower and the actual water pressure required to operate the faucet head. They are more likely to experience extreme temperature changes. harsh.
If you're considering swapping out a low-flow sprayer or your plumbing is old, you can consult a plumber to ensure the hardware is still usable. The reason is to prevent burns or freezing.
How Do You Install a Shower Head?
If you decide to go the DIY route, it's pretty simple with the steps below:
-
Turn off the water in the shower
-
Remove the shower head currently in use.
-
Gently scrape the threads of the shower arm - between the wall and the shower head with your fingers or a small brush.
-
You wrap a few layers of plumber's tape, aka Teflon, around the showerhead's threads.
-
You screw the new shower head into the shower arm.
-
Next, you fasten the shower head with a pipe wrench or a minor spanner - just in case.
-
You slowly operate the new shower to check for leaks.
-
If you observe a leak, turn off the water and remove the shower head, then add a little plumber's tape and tighten the shower head as needed.
Related Post: Best Rain Shower Heads
Is a Hand Sprayer Necessary?
There are many different reasons why someone would want to use a hand sprayer. If you have small children or other caregiving tasks, using a hand sprayer will help control the entire water flow. Even if you don't need the extra flexibility from a hand sprayer, it's easier to reach your body than it would otherwise.
Owning a sprayer reduces the amount of water required for a typical showerhead. However, if you just want a simple high-pressure shower experience, it's better to get a model that doesn't include the nozzle. If the shower head consists of a fixed head and a nozzle, you can use the water pressure balance when both are used.
In addition, the sprayer can also appear many problems after a period of use. If the holder of the sprayer experiences warping, warping, or weakening over time. This can lead to the nozzle not being as powerful as before and the appearance of stagnant water on the bathroom floor.
What to Look for in a Showerhead
Type
Currently, there are 3 main types of showerheads: fixed, handheld, and dual - a combination of fixed and handheld. Fixed showers are usually attached to the wall, while handheld showers connect to the wall via a flexible hose. Handheld and dual batteries will be beneficial when you use them on children or pets.
Spray pattern
Showers come in various spray patterns; some even have spray patterns that can be adjusted to your liking. Some popular ways will include rain, massage, and jet. With the spray pattern will provide comprehensive and gentle coverage. Meanwhile, the spray force is more vital in jet and massage forms.
Related Post: The Best Handheld Shower Heads
Mount
The shower can be wall-mounted or ceiling-mounted, depending on the needs of each family unless you're renovating your home or building a new one.
The type of bracket you choose will depend on your home's existing plumbing configuration. Besides, the wall mount part is becoming more and more popular, especially in old houses or apartments.
FAQs
How long do shower heads last?
According to a share from a plumbing expert, you should change your shower every 6-8 months, especially in areas where tap water is used frequently.
Do bigger shower heads use more water?
Because they are usually larger than traditional shower models, they still provide the right amount of water. You can change depending on your living conditions.
However, we can do a little calculation by distributing the water over a larger surface = less pressure (across a more extensive surface = less pressure).
Related Post: Best Led Rainfall Shower Head
Conclusion
Above are the shares about the best showerhead brands the article wants to send to readers. It can be seen that investing in the best showerhead brands is extremely necessary because they are the equipment that helps your body feel relaxed and rested after stressful and tiring working hours.
Do not forget to pay attention to the information we have sent above to choose the most suitable product for you and your family to use.
You may also like:
